Options Adjustments

Item

 

 

 

 

 

 

Adjustments

 

 

Off

On

 

MENU&ENTER

 

 

 

 

 

Off: All the buttons on main unit can be used.

 

 

 

 

 

 

MENU

ENTER/

buttons on main unit.

 

 

 

MENU&ENTER: Locks

and

 

 

Button lock

On: Locks all the button on main unit.

 

 

 

Sets Button lock with the unit buttons in the following procedure.

ENTER/

 

Off: Press

 

 

INPUT

four times→Press

 

 

four times→Press

four times→Press

 

 

 

 

ENTER/

 

 

 

INPUT

ENTER/

 

MENU&ENTER: Press

four times→Press four times→Press

four times→Press

 

On: Press

four times→Press ENTER/ four times→Press

four times→Press ENTER/

 

Off

User1

User2

User3

 

 

 

 

Off:

You can use all of the buttons on the remote control.

 

Remocon User level

User1:You can only use

, , ,

,

buttons on the remote control.

User2:You can only use button on the remote control.

User3:Locks all the buttons on remote control.

Enable: Enables the “Off-timer function”.

Off-timer function Disable: Disables the “Off-timer function”.

Note: When “Disable” is set, the Off-timer is cancelled.

Normal On Standby

Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.

Initial Power Mode Normal: Power returns in as the same state as before the power interruption. Standby: Power returns in standby mode. (Power Indicator : red/orange)

On: Power returns in power On. (Power Indicator : green)

Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.

 

Off

1

2

3....

30

 

You can set the power-on delay time of the displays to reduce the power load, when you press POWER button

 

to turn on the multiple displays that are set together, for example, on MULTI DISPLAY system.

 

Set each display’s setting individually.

Power On Screen

Off:

 

The display will be turned on at the same time as POWER button is pressed.

1 to 30 (sec.): Set the power-on delay time (second).

Delay

 

 

After pressing POWER button, the display will be powered on with time delay depending on this

 

 

 

 

Notes:

 

setting.

 

 

 

 

 

 

•During this function is working, the power indicator is blinking green.

•This function also works when the power recovers from failure or after plugging off and in again the power cord.

Off: Not display the clock.

On: Display the clock.

The clock is displayed at the lower left of the screen when button is pressed.

Clock Display

 

 

 

Note: When “PRESENT TIME SETUP” is not set, the clock is not displayed even

 

 

 

 

 

 

 

if “Clock Display” is “On” (see page 28)

 

 

 

 

 

 

10:00

 

 

 

 

 

 

 

 

 

 

 

 

Sets the lock setting for the display Power switch.

Power Switch Lock On:

Power switch operation is disabled.

Off:

Power switch operation is enabled.

Normalization

When both main unit buttons and remote control are disabled due to the “Button lock” or “Remocon User level” adjustments, set all the values “Off” so that all the buttons are enabled again.

Press the button on main unit together with button on the remote control and hold for more than 5 seconds. The “Shipping” menu is displayed and the lock is released when it disappears.

43