Panasonic TH-42PW3 Advanced setings Model TH-42PWD3 only, Picture Adjustments

Picture Adjustments

Item	Effect		Adjustments
Contrast			Selects proper brightness and
			density for the room.
	Less	More
Brightness			Adjusts for easier viewing of dark
			pictures such as night scenes and hair.
	Darker	Brighter
Colour			Adjusts slightly to a lighter colour.
	Less	More
Tint			Adjust for nice skin colour.
(NTSC only)	Reddish	Greenish
Sharpness			Displays a sharp image.
	Less	More

Notes:

(1)“Colour” and “Tint” and “Sharpness” settings cannot be adjusted “RGB” and “PC” input signal modes.

(2)You can change the level of each Function (Contrast, Brightness, Colour, Tint, Sharpness) for each Picture Menu.

(3)The setting details for Normal, Dynamic and Cinema respectively are memorized separately for each input terminal (AV, Component, RGB and PC).

(4)The “Tint” setting can be adjusted for NTSC signal only.

Note:

There is little change when contrast is increased with a bright picture or reduced with a dark picture.

Advanced setings (Model “TH-42PWD3” only)

Item	Effect
Black
Extension	Less	More
W/B High R
	Less	More
W/B High B
	Less	More
W/B Low R
	Less	More
W/B Low B
	Less	More
Gamma
	Down	Up

Details

Adjusts the dark shades of the image in gradation.

Adjusts the white balance for light red areas.

Adjusts the white balance for light blue areas.

Adjusts the white balance for dark red areas.

Adjusts the white balance for dark blue areas.

2.0 2.2 2.5

Notes:

(1) Carry out “W/B” adjustment as follows.

AAdjust the white balance of the bright sections using the “W/B High R” and “W/B High B” settings.

BAdjust the white balance of the dark sections using the “W/B Low R” and “W/B Low B” settings.

CRepeat steps A and B to adjust.

Steps A and B affect each other’s settings, so repeat each step in turn to make the adjustment.

(2)The adjustment values are memorized separately for each input terminal (AV, Component, RGB and PC).

(3)The adjustment range values should be used as an adjustment reference.

Helpful Hint ( N / Normalise Normalisation)

On the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any

time or the (Access button) is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

27