Overcurrent error message appears
●●
●●
The connected USB device may cause this error. Remove the device and turn the TV off with Mains Power On / Off switch, then turn it on again.
Check foreign objects are not inside the USB port.
An error message appears
●●
●●
Follow the message’s instructions.
If the problem persists, contact your local Panasonic dealer or the authorised service centre.
Touch Pad Controller does not work or cannot be registered
●● Are the batteries installed correctly?
●● The batteries may be running low. Replace them with new ones. ●● Register again.
Functions > Touch Pad Controller > Settings
●● Use Touch Pad Controller within approx. 3.2 m from the TV. (The range may be shortened depending on the obstacles between the TV and the controller, or the surrounding environment.)
Voice Control function does not work
●● Voice Control function may not work properly depending on the pronunciation, noise and network environment.
●● For details
Functions > Voice Control
The display panel moves slightly and clattered sound is heard when it is pushed with a finger
●● There is a little gap around the panel to prevent damage to the panel. This is not a malfunction.
- 160 -