3.Select Connect to device in WPS with / and press OK to access.

●● To set manually, select Change settings (see below).

4.Select and set WPS(Push button) / WPS(PIN) with / and press OK to access.

WPS(Push button):

Set up the equipment for WPS(Push button). For details, read the manual of the equipment.

WPS(PIN):

Enter the PIN code of the equipment.

●● If the connection has failed, check the settings and positions of the equipment. And then, follow the on-screen instructions.

■■Change settings

You can set up Network name(SSID), Encryption key and Channel setting method manually.

Follow the on-screen instructions and set manually.

●● Set Reset settings to reset the items of Change settings.

= Note =

●● You cannot connect the internet service while the TV is set to Wireless Access Point.

●● You can connect up to 7 devices. But the transfer rate will vary according to communication environment or the numbers of connected equipment.

●● To confirm the current network settings

Network > Network settings > Network Status

●● Ensure the equipment to connect supports WPS for this setup.

●● WPS: Wi-Fi Protected Setup™

Network Status

Displays and checks the network status (MAC Address, current network settings, etc.).

1.Display the menu with MENU.

2.Select Network > Network Status with / and press OK to access.

3.Automatically testing is done and Network Status is displayed. Try Again:

Performs automatic testing of the network connection for the TV and displays the current status again.

- 96 -