Advanced PIP
1
2
3
4
Press to display the Setup menu.
Press to select “OSD Language”.
Press and hold until the Options menu is displayed. Press to select Advanced PIP.
|
|
|
| Options |
| 1/3 |
5 | Press to adjust the menu. |
| Enable |
| ||
Off : Sets normal two screen display mode | Onscreen display | On |
| |||
|
|
|
|
| ||
| (see page 22). |
|
| Initial INPUT | Off |
|
|
|
| Initial VOL level | Off | 0 | |
| On : Sets Advanced PIP mode. |
| ||||
|
| Maximum VOL level | Off | 0 | ||
| Press to confirm. |
|
| INPUT lock | Off |
|
|
|
| Studio W/B | Off |
| |
|
|
|
|
| ||
|
|
|
| Advanced PIP | Off |
|
6 |
|
|
| Display size | Off |
|
Press to exit from | One screen | Advanced PIP |
|
| ||
(When Advanced PIP is On) | Options menu. |
|
|
|
|
|
|
|
|
|
|
| |
7 | Press repeatedly. | Sub screen | Main screen |
|
| |
| Each time pressing this |
|
|
|
| |
| button main picture and |
|
|
|
| |
| sub picture will | be |
|
|
|
|
Note: | displayed as above. |
|
|
|
|
|
|
|
|
|
|
| |
Notes:To use 
, 
, 
, 
buttons for the screen operations, follow the procedures in the previous page.
• Advanced PIP corresponding signal
Sub screen | Main screen |
NTSC, PAL, SECAM (tuner, video) | 640x480@60Hz, 852x480@60Hz, 1024x768@60Hz, |
525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, | 1366x768@60Hz (RGB, DVI, HDMI) |
1125/50i, 1250/50i (Component Video, RGB, DVI, SDI, HDMI) | 1280x768@60Hz (DVI) |
•Sound output is from the picture which is selected in Audio OUT (PIP) (See page 26).
•In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.
•The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the
•Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.
•Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on them satisfactorily.
•Following combinations of two analog signals cannot be displayed simultaneously;
Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)
•Following signals are not applicable to this menu.
1125 / 50p • 60p, 1152 × 864 @60 Hz, 1400 × 1050 @60 Hz, 1600 × 1200 @60Hz, 1920 × 1200 @60 Hz
•Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals.
23
