17
Basic Controls
POWER button
The Plasma Display must rst be plugged
into the wall outlet and turned on at the
power switch (see page 13).
Press this button to turn the Plasma
Display On, from Standby mode. Press
it again to turn the Plasma Display Off to
Standby mode.
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 18)
POS. /SIZE button
(see page 23)
PICTURE button
(see page 24)
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when power is
turned off or volume level is changed.
N button
(see page 23, 24, 25, 26)
POSITION buttons
INPUT button
Press to select INPUT1, INPUT2, INPUT3
and PC input SLOTS sequentially. (see
page 15)
When a dual input terminal board is
attached, A or B is displayed depending
on the selected input signal. (Ex.
INPUT1A, INPUT1B)
MULTI Window buttons
(see page 19) Digital Zoom (see page 21)

Remote Control Transmitter

SET UP button (see page 22)
SOUND button (see page 26)
Volume Adjustment
Press the Volume Up “+” or Down “–”
button to increase or decrease the
sound volume level.
R button (see page 22)
Press the R button to return to
previous menu screen.
OFF TIMER button
The Plasma Display can be preset
to switch to stand-by after a xed
period. The setting changes to 30
minutes, 60 minutes, 90 minutes
and 0 minutes (off timer cancelled)
each time the button is pressed.
30 60
0
90
When three minutes remain, “OFF
TIMER 3” will ash.
The off timer is cancelled if a
power interruption occurs.
OFF TIMER 90
1
2
3
4
PC
4:3
10:00
RECALL button
Press the “RECALL” button to display
the current system status.
1
Input label
2
Aspect mode (see page 18)
3
Off timer
The off timer indicator is displayed only
when the off timer has been set.
4
Clock display (see page 37)
SURROUND button
The surround setting switches on and off each time the SURROUND button is
pressed.
The bene ts of surround sound are enormous. You can be completely enveloped in
sound; just as if you were at a concert hall or cinema.
Note:
The surround settings are memorized separately for each AUDIO MENU (STANDARD,
DYNAMIC, CLEAR). ON
SURROUND
ON OFF