FAQs

Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance.

White spots or shadow images (noise)

Check the position, direction, and connection of the aerial.

Neither image nor sound is produced

Is the TV in “AV mode”?

Isoutlet?the mains lead plugged into the socket

Is the TV turned On?

Check Picture Menu (p. 24) and volume.

An error message appears

Follow the message’s instructions.

If the problem persists, contact the authorized Service Centre.

“VIERA Link” function does not work and an error message appears

Confirm the connection.

Turn the connected equipment on and then switch the TV on. (p. 38)

Problem

Chaotic image, noisy

No image can be displayed

Screen

Blurry or distorted image

 

(no sound or low volume)

Unusual image is displayed

“Shop” appears on screen at switch on

Sound

No sound is produced

Sound level is low

 

or sound is distorted

Contrast is reduced

Contrast is lowered in the following conditions without any user operation for a few minutes:

no signal in DVB or AV mode

selected invalid programme

selected radio service

displayed menu

Thumbnail or still picture in SD Card mode

Pixel Statement

An image on a LCD or Plasma TV screen is created by many small groups of dots known as pixels (which is similar to the image in a newspaper). It also naturally follows that higher panel resolutions contain more pixels. To create a colour image, each pixel consists of three tiny coloured dots (known as sub-pixels), one each of red, green and blue. Each one of these dots is precisely controlled by the electronics of the TV to produce the picture.

Whilst Panasonic maintains the highest standards in manufacturing technology and processes in the construction of these panels, there are a number of allowable pixel/sub- pixel failures that still allow the panel to be defined as a good panel. It is not possible to guarantee absolutely no pixel loss.

Actions

Set “P-NR” in the Picture Menu (to remove noise). (p. 24)

Checklamp). nearby electrical products (car, motorcycle, fluorescent

Is(p.“Colour”24) or “Contrast” in the Picture Menu set to the minimum?

Reset programme. (p. 31)

Turnagain.off the TV with Mains power On / Off switch, then turn it on

“Shop” was selected in “Auto Tuning” (p. 12).

Reset settings in “Shipping Condition” (p. 32), then select “Home” in “Auto Tuning” (p. 12).

Is “Sound mute” active? (p. 11)

Is the volume set to the minimum?

Sound signal reception may be deteriorated.

Set “MPX” (p. 24) in the Sound Menu to “Mono”.

• •Frequently Asked Questions FAQs, etc. Technical Information

47

Page 47
Image 47
Panasonic TH-42PX80A, TH-50PX80A manual FAQs, Problem, Actions