14
First Time Setup
“First time setup” is displayed only when the TV is turned on for the first time after the power cord is
inserted into a wall outlet and when “Auto power on” (p. 30-31) is set to “No”.
or
■ Press to exit from
a menu screen
■
Press to return
to the previous
screen
Note
To change setting
(Language/
Auto program/
Network setting/
VIERA CAST setting/
Clock) later, go to
Menu screen
(p. 30)
Turn the TV On with the POWER button
POWER
or
(Remote)(TV)
* This setting will be skipped next time if you select “Home”.
Select your language
English Español Français
Language select
ok
Be sure to select “Home”
Home Store
Please select your viewing environment. select
ok
Please confirm your selection (Home) before pressing OK button.
■
If you select “Store” by mistake in , confirmation screen will be displayed.
Yes No
You are selecting the mode for store demonstration
select
ok
Select “No” and return to previous screen .
If you select “Yes”, Screen enters store demonstration mode. Displays “Please
select your viewing environment” screen once again as shown below.
Reselect “Home”.
• Unplug the TV and plug it again.
• Press and hold down the front POWER button.
Auto channel setup
Select “Auto program”
First time setup
Language
Clock
VIERA CAST setting
Network setting
Auto program
next
select
Select “ANT in”
Program channel
Cable
ANT in
Auto
next
select
ANT in
Cable: Cable TV
Antenna: Antenna
Select “Auto”
Program channel
Cable
ANT in
Auto
next
select