![](/images/new-backgrounds/1305637/305637115x1.webp)
Technical Information (Continued)
Side Bar
Do not display a picture in 4:3 mode for an extended period, as this can cause “Image retention” to remain on either or both sides of the display field.
To reduce the risk of such “Image retention”, change the brightness of the side bars.
See pages
The side bar may flash (alternate black/white) depending on the picture. Using Cinema mode will reduce such flashing (See below).
Side Bar | Image retention |
4:3
Screen Display
Scrolling bar
Scrolling bar: To prevent “Image retention”, scrolls white horizontal bar from top to bottom on a black | [Scrolling bar] |
screen. |
|
| |
Press any key except the POWER key to return to previous screen. |
|
You will return to previous screen if no key operation has not been performed for 15 minutes. |
|
| |
See pages |
|
|
|
Care and Cleaning
First, unplug the Power cord plug from the wall outlet.
Display panel
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint- free cloth.
If the surface is particularly dirty, soak a soft,
Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected.
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and then wring the cloth dry. Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth.
Do not allow any mild liquid dish soap to come into direct contact with the surface of the Plasma TV. If water droplets get inside the unit, operating problems may result.
Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.
Pedestal
Cleaning
Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small amount of mild liquid dish soap has been added and then wipe with a dry cloth.
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating. (If using a
Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow
58