| Pro setting |
Normal: | Resets all Pro setting adjustments to factory default settings. (Set/No) |
Panel brightness: | Selects the display panel brightness. |
| (High: Vivid, Mid: Standard, Low: Studio ref) |
Contour emphasis: Adjusts the contour emphasis of the image. (On/Off) | |
Gamma adjust: | Gamma correction. Adjusts the intermediate brightness of the image. (Normal/Mid/Full 1/Full 2) |
Black extension: | Adjusts the dark shades of the image in gradation. |
W/B high R: | Adjusts the white balance for light red areas. |
W/B high B: | Adjusts the white balance for light blue areas. |
W/B low R: | Adjusts the white balance for dark red areas. |
W/B low B: | Adjusts the white balance for dark blue areas. |
AGC: | Increases the brightness of dark signal automatically. (On/Off) |
Input signal that can be displayed
* Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC
|
|
| horizontal frequency (kHz) | vertical frequency (Hz) | COMPONENT | HDMI | PC |
525 | (480) / 60i | 15.73 | 59.94 | * | * |
| |
525 | (480) /60p | 31.47 | 59.94 | * | * |
| |
750 | (720) /60p | 45.00 | 59.94 | * | * |
| |
1,125 | (1,080) /60i | 33.75 | 59.94 | * | * |
| |
1,125 | (1,080) /60p | 67.43 | 59.94 |
| * |
| |
1,125 | (1,080) /60p | 67.50 | 60.00 |
| * |
| |
1,125 | (1,080) /24p | 26.97 | 23.98 |
| * |
| |
1,125 | (1,080) /24p | 27.00 | 24.00 |
| * |
| |
640 | × 400 @70 | 31.47 | 70.08 |
|
| * | |
640 | × 480 @60 | 31.47 | 59.94 |
|
| * | |
Macintosh13” (640 × 480) | 35.00 | 66.67 |
|
| * | ||
640 | × 480 @75 | 37.50 | 75.00 |
|
| * | |
852 | × 480 @60 | 31.47 | 59.94 |
|
| * | |
800 | × 600 @60 | 37.88 | 60.32 |
|
| * | |
800 | × 600 @75 | 46.88 | 75.00 |
|
| * | |
800 | × 600 @85 | 53.67 | 85.08 |
|
| * | |
Macintosh16” (832 × 624) | 49.73 | 74.55 |
|
| * | ||
1,024 | × 768 @60 | 48.36 | 60.00 |
|
| * | |
1,024 | × 768 @70 | 56.48 | 70.07 |
|
| * | |
1,024 | × 768 @75 | 60.02 | 75.03 |
|
| * | |
1,024 | × 768 @85 | 68.68 | 85.00 |
|
| * | |
Macintosh 21” (1,152 × 870) | 68.68 | 75.06 |
|
| * | ||
1,280 | × 1,024 @60 | 63.98 | 60.02 |
|
| * | |
1,366 | × 768 @60 | 48.36 | 60.00 |
|
| * | |
Note
Signals other than above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
PC Input Terminals Connection
Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
Some PC models cannot be connected to the set.
There is no need to use an adapter for computers with IBM PC/AT compatible
The maximum resolution: 1,280 × 1,024
If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity. 
Signal Names for
|
|
|
| Pin No. | Signal Name | Pin No. | Signal Name | Pin No. | Signal Name |
11 | 12 | 13 | 14 | 15 | R |
| GND (Ground) |
| NC (not connected) |
6 | 7 | 8 | 9 10 | G |
| GND (Ground) |
| NC | |
1 | 2 | 3 | 4 | 5 | B |
| GND (Ground) |
| HD/SYNC |
|
|
|
|
| NC (not connected) |
| NC (not connected) |
| VD |
Pin Layout for PC Input Terminal | GND (Ground) |
| GND (Ground) |
| NC | ||||
|
|
|
|
| |||||
Technical Information FAQs, etc.
57
