No signal Power off
Automatically turns the TV to Standby mode to prevent unnecessary power consumption when no signal is received and no operation is performed for 10 minutes.
●The notification message will appear 3 minutes before going into Standby mode.
Setup
Eco Navigation
Sets the TV to operate in the most
●You can also access this item by using [VIERA TOOLS].
Child Lock (p. 10)
Tuning Menu (p. 13)
Language
■OSD Language
Changes language for
Display Settings
■Input Labels
Accesses the input labels list to select the label of each input mode or set to skip unconnected one for easier identification and selection in [Input Selection] (p. 9) or banner.
●To skip the input mode, select [Skip].
■Banner Display Timeout
Sets how long the Information banner stays on screen.
■Playing Time Display
Set to [On] to display time spent using Game mode on the top right of the screen every 30 minutes.
●This function is available when [Game Mode] (p. 11) is set to [On].
VIERA Link Settings
■VIERA Link
Sets to use VIERA Link functions [On] / [Off].
■Power on Link
When an HDMI connected equipment starts playback, the TV is turned on and input mode is switched automatically.
●Only when the TV is in Standby mode.
■Power off Link
When the TV is set to Standby mode, the HDMI connected equipment is also automatically set to Standby.
■Standby Power Save
Controls the connected equipment to reduce power consumption in Standby.
●This function is available when [VIERA Link] is set to [On] and [Power off Link] is set to [On].
■Intelligent Auto Standby
Makes
●This function is available when [VIERA Link] is set to [On].
System Menu
■Shipping Condition
Resets all settings to the original condition.
■License Menu
Displays the software licence information.
Other Settings
■Power Save
Reduces brightness of the picture to economise on power consumption.
Help
■TV Self Test
Makes a diagnosis of picture or sound problems
●Follow the
■System Information
Displays the system information of this TV.
Tuning and Editing Channels
You can retune channels or make your favourite channel lists, skip unwanted channels, etc.
[Setup] 
[Tuning Menu]
Auto Tuning
Automatically retune all channels received in the area.
[Manual Tuning] (Analogue TV)
Set Analogue TV channel manually after Auto Tuning.
Manual Tuning
1 |
|
| CH2 | |
Fine Tuning |
|
|
|
|
|
|
|
|
|
Manual Tuning | 1 |
|
| 120 |
Sound System |
|
| 5.5MHz | |
Colour System |
|
| Auto | |
|
| Store | ||
■[Fine Tuning]: Use to make small adjustments to the tuning of an individual channel (affected by weather conditions, etc.)
■[Manual Tuning]: Set Analogue TV channel manually after Auto Tuning.
–Set Sound System and Colour System, and then perform this function. Set Colour System [Auto] normally.
–If a VCR is connected only with the RF cable, select channel position [0].
1 Select the channel position
2Select the channel
3Search
4Select [Store]
English 13
