Panasonic TH-L32A20T, TH-L32A20R, TH-L32A20K, TH-L32A20X, TH-L32A20M manual Advanced

Menu		Item	Adjustments / Configurations (alternatives)
			Sets to use VIERA Link functions (Off / On)
		VIERA Link	● VIERA Link functions become available when “VIERA Link” is set to
	Settings		“On” (p. 35).
		Power on Link	Sets to use Power on Link functions (Off / On) (p. 35)
		Power off Link	Sets to use Power off Link functions (Off / On) (p. 35)
	Link		Controls the power consumption in Standby mode of the connected
		Standby Power	equipment to reduce the power consumption (Off / On) (p. 35)
	VIERA	Save	● This function is available when “VIERA Link” is set to “On” and
			Makes non-watched or non-used connected equipment go
			“Power off Link” is set to “On”.
		Intelligent Auto	into Standby mode to reduce the power consumption
		Standby	(Off / On (With reminder) / On (No reminder)) (p. 35)
			● This function is available when “VIERA Link” is set to “On”.	FunctionsMenu
	SystemMenu	Information	Displays the system information of this TV
		Shipping	Resets all settings to the original condition (p. 30)
		Condition
		Software	Displays the software licence information
		Licence
		System
				UsetoHow
Setup		AV Colour	Selects optimum colour system based on video signals in AV mode
		System	(Auto / PAL / SECAM / M.NTSC / NTSC)
			Available only with 480p or 576p input on video signals in a natural
			colour from digital equipment connected to AV1 component or HDMI1 /
		Colour	HDMI2 / HDMI3 terminals. Select SD or HD to adjust suitable colour
		Matrix	parameters for SD (standard definition) or HD (high definition)
			● SD: Input signal is a normal TV system
			● HD: Input signal is a high definition system
	OtherSettings	Power Save	Sets the time the TV automatically goes to Standby mode when no	Advanced
			Reduces brightness of picture to economise on power consumption
			operation is performed for the selected times (Off / 2 hours / 4 hours)
			● Inserting the SD Card to the card slot does not affect this function.
		Auto Standby	● Automatic input switching with the connected equipment affects this
			function and time-count will be reset.
			● The notification message will appear 3 minutes before going to
			Standby mode.
			(Off / On)
			Selects the screen area for displaying the image (Off / On)
			On: Enlarges the image to hide the edge of the image
			Off: Displays the image in the original size
		16:9 Overscan	● Set to “On” if noise is generated on the edges of the screen.

●This function is available when aspect is set to “16:9”.

●This function can be memorized separately for SD (Standard Definition) and HD (High Definition) signals.

●A different menu will be displayed in the mode of SD Card (p. 32-33).

●Only available items can be selected.

25

TH-L32A20KMRTX_EN.indd 25

5/14/2010 9:31:19 AM