Panasonic TH-L32A20X, TH-L32A20T, TH-L32A20R, TH-L32A20K, TH-L32A20M manual Sound

Menu

Sound

Item		Adjustments / Configurations (alternatives)
	Basic sound mode (Music / Speech / User)
	● The selected mode affects all input signals.
	Music	: Improves sound quality for watching music video, etc.
	Speech	: Improves sound quality for watching news, drama, etc.
		● In Music and Speech mode, you can adjust “Bass” and
Mode		“Treble” settings, and those settings will be stored for each
		mode.
	User
		: Adjusts the sounds manually by using the equalizer to suit your
		favourite sound quality.
		● For the User mode, “Equalizer” will appear on the Sound
		Menu instead of “Bass” and “Treble”. Select the “Equalizer”
		and adjust the frequency. “Equalizer” (below)
Bass	Increases or decreases level to enhance or minimise lower, deeper sound
	output
Treble	Increases or decreases level to enhance or minimise sharper, higher
	sound output
	Adjusts the frequency level to suit your favourite sound quality
	● Select the frequency and change the frequency level by using the
	cursor button.
Equalizer	● If you want to enhance the bass sound, raise the level of the lower
	frequency. If you want to enhance the treble sound, raise the level of the
	higher frequency.
	● To reset the levels of each frequency to the default settings, select
	the “Reset to Defaults” by using cursor button, and then press the OK
	button.
Balance	Adjusts the volume level of right and left speakers
Headphone	Adjusts the volume of the headphones
Volume
	Surround sound settings (Off / V-Audio)
Surround	V-Audio	: Provides a dynamic enhancer of width to simulate improved
		spatial effects
	● Switching is also possible by the Surround button on the remote control
	(p. 10).
Bass Boost	Enhances the bass effect (Off / On)
Volume	Adjusts the volume of individual channel or input mode
Correction
Speaker	Adjusts the low frequency sound (Over 30cm / Up to 30cm)
	● If the back space between the TV and wall is over 30 cm, “Over 30cm”
Distance	is recommended.
to Wall	● If the back space between the TV and wall is within 30 cm, “Up to
	30cm” is recommended.
	Selects multiplex sound mode (if available) (p. 41)
MPX	● Normally : Stereo
	● Stereo signal cannot be received: Mono
	● M1 / M2 : Available while mono signal is transmitted
HDMI1 / 2 / 3	Select to fit the input signal (Digital / Analogue) (p. 42).
	Digital	: HDMI cable connection
Input	Analogue : HDMI-DVI adapter cable connection
	● HDMI input mode only
Reset to Defaults	Press the OK button to reset the present settings of Mode, Balance,
	Headphone Volume, and Surround in Sound Menu to the default.

How to Use Menu Functions

Advanced

23

TH-L32A20KMRTX_EN.indd 23

5/14/2010 9:31:19 AM