24
Storing and cleaning the 3D Eyewear
Use the supplied 3D Eyewear case to store the 3D Eyewear.
●Avoid storing the 3D Eyewear in hot or highly humid locations.
● Use a clean, soft and dry cloth to wipe the 3D Eyewear. Otherwise, dirt or dust may scratch the
●eyewear.
Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel
●off.
Do not submerge the 3D Eyewear in liquid such as water when cleaning.
●
Viewing 3D images
Treat the rubber part carefully not to break it.
●
When the end of the specialised band is straightened, form a loop at the end of the band, and
fix the twisted part.
Fix the
twisted part
Attaching the nose pad
Use either nose pad A or B for your preference.
If you put the 3D Eyewear on vision correction
●
glasses, the nose pad is recommended to be
removed.
You can select the positions of the nose pad
●A from the 2 levels of height. Use upper 2
protrusions or lower 2 protrusions on the 3D
Eyewear to attach the nose pad A.
Use all 3 protrusions on the 3D Eyewear to
●attach the nose pad B.
or
Nose pad B
Nose pad A
Attaching the specialised band
If the 3D Eyewear slips out of place, use the supplied specialised band to hold it in place.
Attach the band to the left and right tips of the frame, and adjust the length.
●
Specialised band
Frame Push to adjust the
length of the band