Panasonic TH-P65VT20M, TH-P65VT20P Setup the wireless LAN connection, Search for access point

Setup the wireless LAN connection

Setup the wireless LAN connection to enable the network service functions.

●To setup the wireless LAN connection, the wireless LAN Adaptor is required. Confirm the encryption key, settings and positions of your access point before starting setup. For details, read the manual of the access point.

●Please note that this TV does not support wireless public access points.

Yes	No		Connect the Wireless LAN Adaptor to the USB 1 or 2 port
Start wireless LAN connection setup?
Please connect the wireless LAN adaptor to a USB terminal.			Internet
You can setup the			environment
wireless LAN connection later			Wireless LAN Adaptor
“Network Setup” (p. 53)
● To skip this step			Access point
EXIT
or select “No”			select “Yes”
			access
Connection Type		Select the connection type		● If your access point supports WPS
Please select network connection type.			confirm
WPS (Push button)				(Push button), then select this option.
Search for access point			select	If not, select “Search for access point”.
WPS (Push button)
		Press the WPS button on the access point until the light flashes.
WPS(Push button)
point until its light flashes.		And then, press the OK button to connect the Wireless LAN Adaptor
1) Please press the ‘WPS’ button on the access
2) When the light is flashing select ‘Connect’ on		and the access point.
TV.
If you are unsure, please check the instruction		● Ensure that your access point supports WPS for this method.
manual of the access point.
		● WPS: Wi-Fi Protected SetupTM
Connect

Guide

Auto Tuning Quick Start

Search for access point

Available Access Points

No.	SSID	Wireless type		Encrypt	Reception
1	Access Point A	11n	(2.4GHz)
2	Access Point B	11n	(5GHz)
3	Access Point C	11n	(5GHz)

Encryption Key Setting

Connection will be made with the following settings:-

SSID : Access Point A

Authentication type : WPA-PSK

Encryption type : TKIP

Please input the encryption key.

Encryption key

Access Point Settings

Encryption key

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

0

1

2

3

4

5

6

7

8

9

!

:

#

a

b

c

d

e

f

g

h

i

j

k

l

m

n

o

p

q

r

s

t

u

v

w

x

y

z

(

)

+

-

.

*

_

Access Point Settings

Encryption key is set to:-

XXXXXXXX

Select ‘Yes’ to confirm.

Select ‘No’ to change.

YesNo

Access points found automatically are listed.

Select your desired access point. ● To search access points again

access Y

select	● For the information of the
	highlighted access point	RECALL
Access the encryption key
input mode

●If the selected access point is not encrypted, the confirmation screen will be displayed. It is recommended to select the encrypted access point.

Enter the encryption key of the access point.

Set characters one by one

select	Store
	RETURN
set

●You can set characters by using numeric buttons. Select “Yes”

select set

●To re-enter the encryption key, select “No”.

Wireless LAN connection setup is completed

●If the connection is failed, check the encryption key, settings or positions of your access point. For details, read the manual of the access point.

●If connection to the access point is successful, we recommend you perform the “Connection Test” to confirm connection to the internet has been made. The “Connection Test” can be found in the Network Setup menu (p. 55).

13