PICTURE Adjustments

1

Press to display the PICTURE menu.

2Select to adjust each item.

Press to select the menu to adjust.

Select the desired level by looking at the picture behind the menu.

Note:

Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

PICTURE

NORMALIZE NORMAL

PICTURE MENU

STANDARD

PICTURE

25

 

 

 

 

 

 

 

 

BRIGHTNESS

0

 

 

 

 

 

 

 

 

COLOR

0

 

 

 

 

 

 

 

 

TINT

0

 

 

 

 

 

 

SHARPNESS

5

 

 

COLOR TEMP

NORMAL

ADVANCED SETTINGS

 

 

 

Press to enter Advanced

Settings.

ADVANCED SETTINGS

Enables  ne picture adjustment at a professional level (see next page).

ADVANCED SETTINGS

NORMALIZE NORMAL

BLACK EXTENSION

0

 

 

 

 

 

 

 

 

INPUT LEVEL

0

 

 

 

 

GAMMA

2.2

 

W/B HIGH R

0

 

 

 

 

W/B HIGH G

0

 

 

 

 

W/B HIGH B

0

 

 

 

 

W/B LOW R

0

 

 

 

 

W/B LOW G

0

 

 

 

 

W/B LOW B

0

 

 

 

 

Press the left or right

button to switch between modes.

STANDARD

DYNAMIC

MONITOR

CINEMA

STANDARD

For viewing in standard (evening lighting) environments. This menu selects the normal levels of BRIGHTNESS and PICTURE.

DYNAMIC

For viewing in brighter environments.

This menu selects higher than normal levels of BRIGHTNESS and PICTURE.

CINEMA

For use in viewing tone-focused pictures with brightness reduced.

MONITOR

For use when creating broadcast or movie content. With this picture, even if the overall average picture level (APL) changes, the brightness of areas with the same signal level does not change.

PICTURE MENU during Touch Pen mode “PICTURE MENU” is  xed to “STANDARD” during Touch Pen mode.

Notes:

When “MONITOR” is selected in PICTURE MENU, the following menu items cannot be set.

EXTENDED LIFE SETTINGS: PEAK LIMIT (see page 39)

MULTI DISPLAY SETUP menu: VIDEO WALL UNIFORMITY (see page 46)

PORTRAIT SETUP menu: VIDEO WALL UNIFORMITY (see page 48)

If you would like to change the picture and color of the selected PICTURE menu to something else, adjust using the items in the PICTURE menu. (see next page)

Press the leftor rightbutton to switch between modes. NORMAL (9300K) COOL (11500K) WARM (6500K)

Helpful Hint ( / NORMALIZE Normalization)

While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION () button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

27