
TOUCH-PEN SETTINGS
Set Touch Pen mode.
Select button.
TOUCH ONLY | |
|
|
SLOT INPUT | OFF |
HDMIOFF
DVIOFF
PCOFF
NETWORKOFF
When a Terminal Board with dual input terminals is installed, “SLOT INPUT” is displayed as “SLOT INPUT A” and “SLOT INPUT B”.
| |
Select an appropriate setting for the function of the electronic pen used. |
|
TOUCH ONLY: |
|
TOUCH & REMOTE: |
|
SLOT INPUT NETWORK |
|
Set “ON” or “OFF” for each input terminal. |
|
If you switch to the input terminal that is set to “ON”, the mode becomes Touch Pen mode. |
|
Notes: |
|
•When the following signal input,
•The electronic pen cannot be used when VIDEO or COMPONENT input is selected.
•The electronic pen cannot be used during Digital Zoom. (see page 22)
•When using the electronic pen, adjust “POS./SIZE” so that the screen of the computer can be correctly displayed. (see page 24)
Setting the Remote ControlYou can also turn Touch Pen mode ON/OFF with the FUNCTION buttons on the remote control. (see page 43)
In Touch Pen mode, the menus and functions are restricted as follows.POS./SIZE menu | 1:1 PIXEL MODE: ON | ||
OVER SCAN: OFF | |||
|
| ||
PICTURE menu | PICTURE MENU: Fixed to “STANDARD” | ||
(see page 27) | |||
|
| ||
| SIGNAL | FRAME CREATION: OFF | |
| EXTENDED LIFE SETTINGS | PICTURE MENU: Fixed to “STANDARD” | |
SETUP menu |
| (see page 38) | |
| MULTI DISPLAY SETUP | MULTI DISPLAY SETUP: OFF | |
| PORTRAIT SETUP | PORTRAIT SETUP: OFF | |
Options menu | Display size: Unavailable | ||
Rotate: Unavailable | |||
|
| ||
ASPECT Controls | FULL |
35