SETUP for PORTRAIT
4VIEWING AREA / LOCATION
VIEWING AREA: Set a mode of image division for PORTRAIT function.
LOCATION: Set a location of image to be displayed for PORTRAIT function.
Press to select VIEWING AREA or LOCATION.
Press to select each function.
Notes:
• For HD signal videos, the “VIEWING AREA” is set at “16:9”, and cannot be changed.
HD signal: 1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p
• 24sF, 750 (720) / 60p • 50p, 1250 (1080) / 50i
•When “VIEWING AREA”is “16:9”, the aspect mode is set to “FULL”.
LOCATION setting
OFF
OFF
16:9
1
OFF
When PORTRAIT SETUP “ON”: | When PORTRAIT SETUP is “OFF”: | |||||||||||||||||
Display the image of the selected LOCATION. | Represent an area of the selected LOCATION at a normal | |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| brightness and darken the rest of it. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VIEWING AREA and LOCATION
The mode of image division and the LOCATION by setting of VIEWING AREA is as follows.
VIEWING AREA: 16:9
LOCATION 1 | LOCATION 2 | LOCATION 3 |
Undisplayed area (48 dots)
VIEWING AREA: 4:3
LOCATION 1 | LOCATION 2 | LOCATION 3 |
Suitable to display FULL images. NORMAL (4:3) images extend transversely.
Both right and left sides of the image are cut by 48 dots.
4:3 images are displayed without changing aspect ratio.
Although the images of each LOCATION overlap, you can adjust POS./SIZE to display the image normally. (see page 24)
5VIDEO WALL UNIFORMITY
Reduces the peak of brightness for each display to enable as uniform display as possible.
Press to select VIDEO WALL UNIFORMITY.
Press to select “OFF” , “ON”.
The brightness depends on | The brightness difference | |||||||||
| each display’s setting. |
| is minimized. | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OFFON
PORTRAIT SETUP
PORTRAIT SETUP | OFF |
|
|
|
|
SEAM HIDES VIDEO | OFF |
|
|
|
|
VIEWING AREA | 16:9 |
|
|
|
|
LOCATION | 1 |
|
|
|
|
VIDEO WALL UNIFORMITY | OFF |
Note:
If you set VIDEO WALL UNIFORMITY to ON, the following menus will be unavailable and these settings will be xed to the initial values. PICTURE menu: COLOR, TINT, INPUT
LEVEL (ADVANCED SETTINGS)
48