Panasonic TQB2AA0632E1 Select Edit, Select the item to edit, Move the cursor to a channel number

Menu Signal meter Channel

Tune manually

Automatically searches and adds available channels to the memory.

Select “ANT in”			Start scanning the channels
Select “Cable” or “Antenna”			(Available channels are automatically set.)
Or select “Not used”.			Auto program
Select “Auto program”			Progress	8%
Menu ANT/Cable setup			Number of analog channels	10
	Cable		Number of digital channels	0
ANT in		next
Auto program			Press RETURN to quit
Manual program
Signal meter		select	RETURN

After the scanning is completed, select “Apply”. (see below ).

All previously saved channels are erased.

Use this procedure when changing the channel setup or changing the channel display.

Also, use this to add or skip channels from the channel list manually.

Select “Edit”

Manual program

Edit	Apply		Cancel
Channel	Caption		Add	select
2	...	...	Yes
	...	...

Edit

Caption

Edit CH caption

Channel 80-101

Caption		@ D A
	OK
Select	RETURN
R	G	B	Y
	ABC → abc		Delete

change or

set

Editing and

3			Yes	next
4	...	...	Yes
5	...	...	Yes

Select the item to edit

Manual program					select the item
Edit		Apply		Cancel	to edit (Caption/
2		...	...	Yes	Add)
Channel		Caption		Add
3		...	...	Yes	next
4		...	...	Yes
5		...		Yes
6		...		Yes	• Caption:
8	Caption...			AddYes
7		...		Yes
9		...		Yes	Changes the station identifier
Select		RETURN			Adds or skips channels
					• Add:
R Prev.page		G Next page B			Y

Proceed to next page

Go back to the previous page

Caption

Select or edit the station identifier. (maximum 7 characters available)

Add

Press OK to select “Yes (add)” or “No (skip)”

Move the cursor to a channel number

Manual program				select
Edit	Apply		Cancel
Channel	Caption		Add	Press OK to tune
2	...	...	Yes
				to the channel.
3	...	...	Yes

Select “Apply”

program				select
	Apply		Cancel
el	Caption		Add
	...	...	Yes	OK

Setting Channels Advanced

To cancel the Edit

Manual program				Changes will be lost. Continue?		OK
Edit	Apply		Cancel	Yes	No
2	...	...	Yes			(returns to “ANT/
				select
Channel	Caption		Add
3	...	...	Yes	next		Cable setup”)
4	...	...	Yes			select “Yes”
5	...	...	Yes

Check the signal strength if interference is found or freezing occurs on a digital image.

--

If the signal is weak, check the antenna.

If no problem is found, consult your local dealer.

		or	change
Signal strength			channel	Note
Current	86%		OK
Peak level	98%	Signal intensity		Not available if “Cable” is selected in “ANT in” (see above).
Selects which channel to be tested for signal				Available only for digital antenna channels.
strength.

If “Lock” (p. 20) is activated and “ANT/Cable setup” is selected, “Enter password.” will be displayed.

23