FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution:

To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. of North America could void the user’s authority to operate this device.

FCC Declaration of Conformity

Model No. TH-32LRH30U

Responsible Party:

Panasonic Corporation of North America

 

Three Panasonic Way, 2F-5, Secaucus, NJ 07094

Contact Source:

Panasonic Solutions Company

 

1-800-973-4390

CEA CHILD SAFETY NOTICES: Flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause personal injury or even death.

The consumer electronics industry (of which Panasonic is a member) is committed to making home entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety guidelines:

TUNE INTO SAFETY:

•One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display.

•Carefully read and understand all enclosed instructions for proper use of this product.

•Don’t allow children to climb on or play with furniture and television sets.

•Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.

•Remember that children can become excited while watching a program, especially on “larger than life” flat panel displays. Care should be taken to install the display where it cannot be pushed, pulled over, or knocked down.

•Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children.

WALL MOUNTING: TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

•Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).

•Follow all instructions supplied by the display and wall mount manufacturers.

•If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation.

•Make sure the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer.

•A minimum of two people are required for installation. Flat panel displays can be heavy.

The American Academy of Pediatrics discourages television viewing for children younger than two years of age.

6

Page 5 Page 7
Page 6
Image 6
Panasonic TQB2AA0632E1 owner manual FCC Statement
Page 5 Page 7

TQB2AA0632E1 specifications

The Panasonic TQB2AA0632E1 is a cutting-edge power management IC that exemplifies Panasonic's commitment to innovation in the field of electronics. Designed specifically for high-efficiency applications, this device stands out due to its advanced features and robust functionality.

One of the key features of the TQB2AA0632E1 is its ability to manage power consumption effectively. With a focus on energy efficiency, this IC helps reduce overall energy usage, making it an excellent choice for battery-operated devices and energy-sensitive applications. The integrated smart power management technology monitors and optimizes power flow, ensuring that devices operate at peak efficiency while extending battery life.

Additionally, the TQB2AA0632E1 incorporates several protection mechanisms that enhance its reliability and longevity. These include over-voltage protection, over-current protection, and thermal shutdown capabilities. Such safeguards are crucial for preventing damage and ensuring stable operation in various operating conditions.

Another notable characteristic of this IC is its compact design. The small footprint allows for easy integration into a wide range of systems without requiring excessive board space. This makes it particularly suitable for portable devices, wearables, and IoT applications where space is at a premium.

The TQB2AA0632E1 also features a high integration level, which simplifies circuit design and reduces the number of external components needed. This not only streamlines manufacturing but also lowers overall production costs, making it a strategic choice for developers looking to optimize their designs.

In terms of performance, the device operates within a wide voltage range, making it versatile for various applications. Its compatibility with different input and output configurations also adds to its flexibility, allowing engineers to adapt it easily to specific project requirements.

Overall, the Panasonic TQB2AA0632E1 encapsulates the latest advancements in power management technology, offering a suite of features designed to enhance efficiency, reliability, and versatility. Whether used in consumer electronics, industrial machinery, or automotive applications, this IC stands as a testament to Panasonic's dedication to quality and innovation in the ever-evolving electronics landscape.
Top Page Image Contents