Replacing the oven light bulb/cleaning the glass cover

Warning! Be careful! There is the risk of electrical shock!

1.Turn the glass cover anti-clockwise to remove it.

2.Clean the glass cover.

3.Replace the oven light bulb with applicable 300°C heat-resistant oven light bulb. New oven light bulb must have the same parameters as your previous one.

4.Install the glass cover.

What to do if…

Warning! Refer to "Safety information" chapter.

Problem

The oven does not heat up

The oven does not heat up

The oven lamp does not operate

Steam and condensation settle on the food and in the oven cavity

Possible cause

The oven is not switched on

The fuse in the fuse box is released

The oven lamp is defective

You left the dish in the oven for too long

Remedy

Switch on the oven (refer to chapter "Daily use").

Control the fuse. If the fuse is re- leased more than one time, refer to a qualified electrician.

Replace the oven lamp

Do not leave the dishes in the oven for longer than 15-20 minutes after the cooking process ends

If you cannot find a solution to the problem yourself, contact your dealer or the service centre.

We recommend that you write the data here: Model (MOD.)

Product number (PNC) Serial number (S.N.)

The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity.

.........................................

.........................................

.........................................

Installation

Warning! Refer to "Safety information" chapter.

10

Page 10
Image 10
Zanussi ZOB142 user manual What to do if…, Installation, Replacing the oven light bulb/cleaning the glass cover