•Disconnect the appliance from the power supply before the replacement of the oven lamp. There is the risk of electrical shock!
•Only an approved engineer can repair or work on the appliance. Contact an approved service centre.
•Use only original spare parts.
•To prevent the risk of physical injury or damage
–Disconnect the appliance from the power supply.
–Cut off the mains cable and discard it.
–Discard the door catch. This prevents children or small animals from being closed inside of the ap- pliance. There is the risk of suffocation.
2 |
| 3 |
| 4 |
1
5
6
7
8 9
For cookware, cake tins, roasts.
1Control panel
2Temperature indicator
3Temperature control knob
4Oven function control knob
5Air vents for the cooling fan
6Grill
7Oven lamp
8Fan
9Rating plate
To bake and roast or as pan to collect fat.
To put in the deep roasting pan.
Warning! Refer to "Safety information" chapter.
1.Set function and maximum temperature.
2.Run an empty oven for 45 minutes.
3.Set function and maximum temperature.
4.Run an empty oven for 15 minutes.
This is to burn off any residue from the cavity surface. Accessories can become more hot than in normal use.
4
During this period an odour and smoke can be emitted. This is normal. Make sure the airflow is sufficient.
•Remove all parts from the appliance.
•Clean the appliance before first use.
Caution! Do not use abrasive cleaning agents! This can damage the surface. Refer to chapter "Care and
Cleaning".