ASPECT CONTROLS
The receiver will allow you to enjoy viewing the picture at its maximum size, including widescreen ‘cinema format’ pictures.
Press the ASPECT button to move through the six aspect options: Panasonic Auto, 4:3, Zoom,
Panasonic Auto
Some broadcasts are transmitted together with a wide screen identification signal (WSS). If the receiver receives this signal then it will automatically switch to wide screen 16:9 mode, maximum display.
The automatic widescreen switching depends upon reception conditions and the strength of the signal. If the signal is poor and therefore the WSS is weak then it is possible that the picture
may not expand to full size and that the receiverPanasonic Auto will display black areas around the edges.
If the original source signal was a standard 4:3 aspect ratio then you might prefer to view it in its original size; the red and green keys that appear will allow you to choose between viewing at standard 4:3 size or expanded in Just mode.
4:3
4:3 will display a 4:3 picture at its standard 4:3 size and can be selected if you wish to view in this format.
Note:
After setting this mode, turn the power off and back on again to activate the Just mode setting.
4:3
Zoom
Zoom mode magnifies the central section of the picture.
The picture can be moved and enlarged vertically using the colored keys. The former adjustment is useful for viewing any
Zoom
9
