Cable cover removal and fitting
Removal
1. Push down hooks and pull the cover slightly towards
2yourself to disengage the claws (at 4 points).
1 2. Slowly pull out in the downward direction.
Fitting
2
1
1
Note:
1. Insert the claws (at 4 points) at the bottom end.
2. Push it until hook will be cricked.
To avoid interference appearing on the screen, do not bundle the RF cable and mains lead together.
How to open the front cover
Rise the lower part of “
”.
How to use the LCD stand
Adjust the stand to your desired angle. The stand angle can be adjusted between 40 °
(Figure from the top)
20 ° | 20 ° |
Front
Note:
The stand angle cannot be adjusted forward and backward.
4
