Tuning Channels
Colour System Selection (Different region use differing systems)
If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, this function is used.
1
Press to select the “COLOUR SYS”.
TUNING MENU |
|
CH SELECT | POSITION |
SYS SELECT | JAPAN |
AUTO TUNE |
|
MANUAL TUNE |
|
SOUND SYS | 6. 0MHz |
COLOUR SYS | AUTO |
FINE TUNE |
|
SKIP | OFF |
2
Press to produce the optimum image.
The colour system will change as shown.
AUTO PAL SECAM
NTSC3.58 NTSC4.43
Colour System Condition.
TUNING MENU |
|
CH SELECT | POSITION |
SYS SELECT | JAPAN |
AUTO TUNE |
|
MANUAL TUNE |
|
SOUND SYS | 6. 0MHz |
COLOUR SYS | AUTO |
FINE TUNE |
|
SKIP | OFF |
Note:
PAL, SECAM and NTSC 3.58 are different colour signal broadcast transmission systems applicable to differing countries. NTSC 4.43 is a trick playback mode used in special VCR to playback NTSC recorded video tapes through PAL television equipment.
3
STR
Press to store the Colour System.
TV/AV
Press to exit from the “COLOUR SYS”.
This returns the set to the normal viewing condition.
21
