Before Operating This Set
Connecting the Plug to the Wall Outlet
Note:
Main plug types vary between countries. The main plug shown at left may therefore not be the type fitted to your set.
How to Turn the Power On
Power Indicator
Power Switch
| Power OFF |
|
| Power Indicator | |||
|
|
|
|
|
|
| No light: Power OFF condition |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note: Even when the Power Switch is "OFF", the TV set
will still consume a small amount of power.
Power ON | Push the Power switch on Television to turn the set on. | ||||||
|
|
| Power Indicator | ||||
|
|
|
|
|
|
| No light: Normal viewing condition |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| Red : Stand by |
Notes:
•When in the
•If the Wall Outlet is switched OFF or the Main Plug is unplugged, when the TV set is again turned ON (by either connecting the Main Plug to the Wall Outlet or switching the Wall Outlet ON), it will have returned to the original state.
Battery Installation
1 Open the cover. | 2 Batteries: Use two “R6 (AA)” size 3 Replace the cover. |
Apply slight downward pressure | batteries. |
while pulling towards the bottom. | Insert the batteries ensuring the correct |
| polarities. |
| This is identifiable by the “+” and “− ” symbols |
| on the batteries and inside the battery |
| compartment. |
| Two “R6 (AA)” size |
Do not use rechargeable
They are different in shape and performance and may fail to ensure correct operation.
Battery cautions
The incorrect use of batteries can cause electrolyte leakage which will corrode the Remote Control or cause the batteries to burst.
Old Batteries | New Batteries |
Replace both batteries at the same time. | Don't mix diffrent battery types. | Don't Recharge. |
| (alkaline with carbon zinc, etc.) |
|
|
|
|
7
