Panasonic TX-43P800H, TX-51P800X, TX-51P800H, TX-43P800X Setup Adjustment, Child Lock

Setup Adjustment

1

2

3

SET UP

Press to display the SETUP MENU.

Press to select the desired function.

Press to adjust or change the function.

SETUP MENU SETUP MENU

TELETEXT	FASTEXT	TEXT SELECT	ENGLISH
OFF TIMER	OFF	PICTURE SHIFT	ON
CH COLOUR SET		TUNING MENU
CHILD LOCK	OFF	LANGUAGE
BLUE BACK	ON	OWNER ID
ILLUMINATION	ON	CONVERGENCE
3D-COMB	ON

TV/AV

Press to go back to watching TV.

CHILD LOCK

If the Child-Lock function is set ON, picture and sound of the TV/AV mode being viewed will disappear and a Black screen will appear.

BLUE BACK

You can choose Blue Back display ON or OFF when there is no signal.

ILLUMINATION

Select “ON” to illuminate the ILLUMINATION LIGHT on the front panel. Otherwise, select “OFF”.

3D-COMB

You can choose 3D-COMB function ON or OFF. If the 3D-COMB function is ON, dot interference or cross colour will be reduced. Note: Not available in component and RGB input.

OFF TIMER

Switches the TV off within a preset time which you can choose from between 0 to 90 minutes in 15 minutes intervals.

OFF 15 30 45

90 75 60

CH COLOUR SET

Colour density varying between broadcast channels can be adjusted to three levels for each reception channel.

PICTURE SHIFT

For use as a screen saver, this function changes the entire picture position (shift) approximately 2 mm every 15 minutes.

LANGUAGE

When you first install the TV, the On Screen Display language is set according to your choice of region. LANGUAGE lets you change the language used for On Screen Displays (refer to page 5).

[ for TX-43/51P800H ]		[ for TX-43/51P800X ]
English	Chinese	English	Arabic

During AV mode, the appearance of the SETUP MENU will differ from that of the TV mode, with the following function adjustments

becoming available.	SELECT
	CHANGE
	TV / AV - EXIT

SETUP MENU		SETUP MENU
		TELETEXT	FASTEXT
COLOUR SYS	PAL
		OFF TIMER	OFF
FLICKER REDUC.	ON	CH COLOUR SET
3D-COMB	ON
		CHILD LOCK	OFF
TEXT SELECT	ENGLISH	BLUE BACK	OFF
PICTURE SHIFT	ON	ILLUMINATION	OFF
LANGUAGE		VCR / GAME	OFF
OWNER ID
CONVERGENCE

			FLICKER REDUCTION
COLOUR SYSTEM
			Lets you control any picture movement. Set to ON to activate
During AV mode, COLOUR SYSTEM is displayed.			motion compensation, to smooth the image and get rid of picture
			movement. Set to Off to have no flicker reduction at aIl,
If a clear picture with current colours cannot be obtained when
			occasional broadcasts may benefit from using this setting.
a Broadcast or AV signal is received, then the colour system
will change as shown.			ON	OFF
AUTO	PAL	SECAM
NTSC3.58		NTSC4.43

PAL, SECAM and NTSC 3.58 are different colour signal broadcast transmission systems applicable to differing countries. NTSC 4.43 is a trick playback mode used in special VCR to playback NTSC recorded video tapes through PAL television equipment.

VCR/GAME

Reproduction of irregular signals, such as certain TV games and rental video tapes, may be improved.

23