How to remove the battery
Disassemble this product after the battery has run out of power.
The following figures are intended to explain
how to dispose of the product, not for describing how to repair. The product cannot be repaired once it has been disassembled.
1. | Fold the part of the frame without the |
|
| power switch, and then remove the two |
|
| screws on the inside of the hinge with a | Screws |
| precision Phillips (plus ) screwdriver. | |
|
| |
|
| Frame |
2. | Bend the frame inwards and pull it off | Side cover |
| from the side cover. |
|
If it is difficult to remove, insert a 
) screwdriver and force it off.
Battery
3. Remove the battery from inside the side cover, and cut the two wires one by one with scissors.
Insulate the wire parts of the removed battery with cellophane tape.
NOTE
•Take sufficient care when performing this work so as not to injure yourself.
•Do not damage or dismantle the battery.
ENGLISH - 11
