Identifying Controls
Infra-red receiver
Receives
The liquid crystal shutter open/close timing is controlled by receiving
If the eyewear stops receiving
(Shown as | Liquid Crystal Shutter |
| (lens) |
Controls the images for 3D viewing.
The left and right liquid crystal shutters are alternately opened and closed in time with the left side and right side images that are alternately displayed on the television to achieve the 3D effect.
Power switch (bottom side of 3D Eyewear)
Switches on the 3D Eyewear power. The 3D Eyewear is turned on by setting the power switch to “ON”. Set the power switch to “OFF” to turn off the 3D Eyewear.
Charging port
Connect the chaging cable.
( page 9)
Indicator lamp
Lights or flashes during use or charging to show the status of the rechargeable battery.
Battery status shown by indicator lamp
Power/indicator lamp status | Battery status |
Lights for 2 seconds when turned on | Sufficient battery level |
|
|
Flashes 5 times when turned on | Low battery level |
Flashes once every 2 seconds when in use | Operating normally |
|
|
Lights continuously when off | Charging |
|
|
Lamp off | Power off |
|
|
ENGLISH - 5