Panasonic TYEW3D2SU, TY-EW3D2SU Viewing the 3D Image, „„Wearing the 3D Eyewear, „„After Use

Viewing the 3D Image

NOTE

•Charge the 3D Eyewear before using the first time after purchase or after long periods of disuse.

„„Using the television menu controls, set so that 3D images are shown.

1.(When 3D image signals are being received) press the MENU button on the television remote control.

2.Select "Setup", and press the OK button.

3.Select "3D settings", and press the OK button.

4.Select "3D Eyewear", and use to select "On" or "Off".

The procedure above is only an example. For details, see the television operating instructions.

„„Wearing the 3D Eyewear

1.Set the power switch to “ON”.

(The indicator lamp will light for approximately 2 seconds, then flash once approximately every 2 seconds.)

2.Put on the 3D Eyewear.

If the 3D images are not displayed correctly, adjust the 3D image-related settings. For details, see the television operating instructions.

* The perceived three dimensional effects of the 3D Eyewear differ from person to person.

NOTE

•For television settings, see the television operating instructions.

•If the eyewear stops receiving infra-red signals from the television, the power automatically switches off after 5 minutes. If that happens, set the power switch to “OFF” then “ON” again.

„„After Use

Set the 3D Eyewear power switch to “OFF”.

(The 3D Eyewear indicator lamp turns off, and the power turns off.) After using the 3D Eyewear, store it in the case provided.

8 - ENGLISH