5
Note
•
Place the touch panel making its front surface face down on a clean cloth or blanket to prevent the front
surface of the touch panel from getting scratched or dirty during work.
Mounting in horizontal posture
Attach the mounting brackets A (for top and bottom sides) to the touch panel with the mounting screws A (2 each).
See the ¿ gure below for the screw holes of attachment positions.
Attachment positions
(8 holes without screws in them)
Mounting in vertical posture
Check in the ¿ gure below the positions where the brackets are attached, and remove the screws (8 in total from top and bottom sides).
Attach the mounting brackets A (for top and bottom sides) with the mounting screws A (2 each) to the screw
holes from which the screws were removed.
Notes
•
For screw holes of other models than 42V, see “Drawing of Screw Holes” (page 14).
•
Keep the screws which were removed.
The procedure for vertical posture is the same.
Touch Panel Assembly
123456
Mounting screw A
Mounting
bracket A
(for top side)
Top side (42V)
Bottom side (42V)
12345
Mounting screw A
Mounting
bracket A
(for bottom
side)