8
Connection with Computer

OS of computer

IBM PC/AT compatible machine with USB ports,
supporting the OS below
Windows XP (SP2 or later, 32 bit or 64 bit)
Windows Vista (32 bit or 64 bit)
Windows 7 (SP1 or later, 32 bit or 64 bit)
Caution
•
The USB ports should function correctly.
•
If a previous version of driver has been installed, disconnect the USB cable of the touch panel from the
computer, uninstall the previous version, and then install the new one.
•
For installation and uninstallation of the touch panel driver, see the installation manual of the touch panel driver
software included in the supplied CD-ROM.
•
When using Windows 7, installation of the touch panel driver is not necessary.
When using Windows XP or Vista, follow the descriptions of the installation manual of the driver software
included in the supplied CD-ROM for connection of the USB extension cable and setup of the touch panel
driver software.
Operating Conditions
Computer
USB connector type A
(Female)
Touch panel
Main device
Connect to the
USB port on
your computer.
To connect to your computer,
see the instruction manual of
the main device.
USB connector type A
(Male)
USB connector type A
(Male)
Caution
•
If the infrared transmissive part on the screen is shaded by your ¿ ngers or other things when connecting the
USB extension cable, that may be detected as a failure during initialization and, if no corrective action is taken,
touch detection may not correctly function partially.
In that case, disconnect and reconnect the USB extension cable. At this time, restarting the computer is not
necessary.
•
Because some cables may not ensure the proper functioning of the equipment, use the USB extension cable
supplied with the equipment.