Help
Troubleshooting
Indicator
Problem | Cause & Solution | Page |
The POWER indicator is | L�The power is not turned on. Connect the AC | 14 |
turned off. | adaptor. |
|
The STATUS indicator is | L�The repeater has not been registered. Register it | 12 |
turned off. | to the main monitor station. |
|
The STATUS indicator is | L�The power of the main monitor station is not | — |
flashing in red. | turned on. Turn it on. | 14 |
| L�The repeater is out of range. Install it in a | |
| location where the STATUS indicator lights in |
|
| green. |
|
The IN USE indicator | L�The repeater is relaying radio waves. | — |
lights in green. |
|
|
The IN USE indicator is | L�The sub monitor station is being used in a place | 6 |
turned off when using the | where the radio signal is stronger from the main |
|
sub monitor station. | monitor station than the repeater. (This is not |
|
| malfunction.) |
|
|
|
|
Others |
|
|
|
|
|
Problem | Cause & Solution | Page |
Can I register the | L�You cannot register one repeater to two or more | — |
repeater to another main | main monitor stations. To register to another |
|
monitor station? | main monitor station, another repeater is |
|
| needed. |
|
Can I locate the repeater | L�You can install the repeater in a location where | 14 |
in a place where the | the STATUS indicator lights in amber or red, |
|
STATUS indicator does | but sound cuts in and out, or calls may be |
|
not light in green? | disconnected. We recommend a location where |
|
| the indicator lights in green. |
|
Can I locate the repeater | L�Do not install the repeater outdoors. | — |
outdoors? |
|
|
The repeater does not | L�The STATUS indicator lights in amber or red, | 14 |
improve the radio signal. | or is flashing in red. Reinstall the repeater in a |
|
| location where the indicator lights in green. | 6 |
| L�The repeater has been installed near the main | |
| monitor station. In this location, the repeater |
|
| cannot work effectively because the sub monitor |
|
| station receives radio waves from only the main |
|
| monitor station. Reinstall it in a location near to |
|
| where the sub monitor station is used. |
|
16
