Panasonic WJ-NT304 Specifications, Standard Accessories, Network Interface Unit, AC Adapter

Specifications

■Network Interface Unit

Power source:	12 V DC, 1.0 A (using the supplied AC adapter)
Power consumption:	Approx. 12 W
Ambient temperature:	–10 °C to +50 °C {14 °F to 122 °F}*1
Ambient humidity:	Less than 90 %
Video input connectors:	NTSC model: 1 V [P-P]/75 Ω (BNC x 4), NTSC composite video signal
	PAL model: 1 V [P-P]/75 Ω (BNC x 4), PAL composite video signal
Video output connectors:	NTSC model: 1 V [P-P]/75 Ω (BNC x 4), active loop-thru output NTSC composite video signal
	PAL model: 1 V [P-P]/75 Ω (BNC x 4), active loop-thru output PAL composite video signal
Audio input connector:	–10 dBV, 10 kΩ, unbalanced x 1 (RCA pin jack)
Audio output connector:	–10 dBV, 600 kΩ, unbalanced x 1 (RCA pin jack)
Serial port:	9-pin D-sub connector x 1 (For remote setup)
	RS-485, x1 (RJ-11) (For external device control)
Parallel port:	Input x 4*2, output x 4*3, AUX output x 1*3, Time adjust input x 1*2
Resolution:	640 (H) x 480 (V) / 320 (H) x 240 (V) selectable
Image compression method:	JPEG/MPEG-4
Audio compression method:	G.726
Protocol:	HTTP1.1, RTP, TCP/IP, UDP/IP, FTP (server and client), SMTP, DHCP, DNS, DDNS, NTP, SNMP
Camera control:	Pan and tilt/zoom and focus/preset positions/auto focus
	(When using Panasonic combination dome cameras)
Network:	10BASE-T/100BASE-TX, RJ-45 connector
Security:	Password
OS:	Microsoft® Windows® 2000 Professional SP4, Windows® XP Home Edition SP2, Windows® XP
	Professional SP2
Browser:	Microsoft® Internet Explorer® 6.0 SP2
	Microsoft® Internet Explorer® 6.0 SP1 only when using Windows® 2000 Professional SP4
	Compatible SD memory card is as follows. (Optional)
	Manufactured by Panasonic (Performance with this unit has been checked.)
	Capacity:64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB (SDHC memory card is not supported.)
Dimensions:	210 (W) x 44 (H) x 307 (D) mm {8.27" (W) x 1.73” (H) x 12.09” (D)}
	(excluding rubber feet and projections)
Weight:	Approx. 2.0 kg {4.4 lbs.}

■AC Adapter

Power Source:		100 V AC to 240 V AC, 50 Hz/60 Hz
Output voltage:		12 V DC
Output current capacity:		4.58 A
Dimensions:		120 mm (W) x 60 mm (H) x 35 mm (D) {4.72" (W) x 2.36" (H) x 1.38" (D)} (excluding the DC cable)
Weight:		0.35 kg {0.77 lbs.}
*1	When using this product without turning the power off
*2	Non-voltage make contact input, 50 kΩ +5 V DC pull-up
*3	Open Collector output, +24 V, 100 mA maximum

Standard Accessories

CD-ROM*	1 pc.
Operating Instructions (this book)	1 pc.
Warranty card (NTSC model only)	1 pc.

*The CD-ROM contains the operating instructions (PDFs and the software).

The following are for installation.
AC adapter*	1 pc.
Code label	1 pc.
Power cord*
NTSC model	1 pc.
PAL model	2 pcs.
* Use the power cord that is suited to your locality.

19