CONNECTIONS
The connections described below should be made by qualified service personnel or system installers.
An example of a basic connection is shown below.
Video Switcher
VIDEOA
IN
CCIR 
EIA
OUT | AC IN |
■Connection with the Camera
Site
Connect the Video output of the camera site equipment to the VIDEO IN connector at the rear of the monitor using a coaxial cable.
The maximum coaxial cable length between the camera and the monitor is shown in the table below.
Cable | |||||
| |||||
|
|
|
|
| |
Cable length | 500 m | 750 m | 1 000 m | 1 250 m | |
(1 650 ft) | (2 475 ft) | (3 300 ft) | (4 125 ft) | ||
| |||||
|
|
|
|
|
■Multiple Monitor Connection
Connect the VIDEO OUT connector on the monitor to the VIDEO IN connector of an other monitor with a coaxial cable to monitor the same video on multiple monitors.
Up to 10 monitors in total can be connected in a series before signal loss occurs. The total cable length should not exceed 150 m (500 feet).
Video Switcher
Cameras
Coaxial
Cable
Coaxial Cable
VIDEO
IN
First Video
Monitor
OUT
VIDEO
IN
Last Video
Monitor
OUT
6
