Panasonic WV-CL920A operating instructions Mounting the Lens

Mounting the Lens

Caution:

Before you mount the lens, loosen the fixing screw on the side of the camera, and rotate this ring upward until it stops. If the ring is not at the end, the inner glass or CCD image sensor may be dam- aged.

1.Mount the lens by turning it clockwise on the lens mount of the camera.

2.Connect the lens cable to the auto iris lens connec- tor on the side of the camera.

q

w

Screw

Flange-back

Adjusting Ring

Caution for Mounting the Lens

The lens mount should be a CS-mount (1”-32UN). In case of a C-mount, it should be a C-mount adapter and the lens weight should be less than 450 g (0.99 lbs). If the lens is heavier, both the lens and camera should be secured by using the supporter.

The protrusion at the rear of the lens should be as shown below:

CS-mount: Less than 4 mm (5/32”)

-12-