Panasonic WV-CL920A operating instructions Editing the CAM SET UP Menu, Important Notice

• Editing the CAM SET UP Menu

Important Notice:

When SET UP DISABLE appears in the bottom line of the CAM SET UP menu, you cannot change the currently active settings. This is to prevent acciden- tal changing of the settings.

To edit the CAM SET UP menu (change settings), press

and or and to move the cursor to SET UP DISABLE in the bottom line.

Press . SET UP DISABLE changes to SET UP ENABLE. Move the cursor to END, then to the item(s) you want to change.

	** CAM SET UP **				** CAM SET UP **
CAMERA ID			OFF	↵	CAMERA ID		OFF	↵
ALC/ELC			ALC	↵	ALC/ELC		ALC	↵
SHUTTER			OFF		SHUTTER		OFF
AGC			ON (DNR-H)		AGC		ON (DNR-H)
SENS	UP		OFF		SENS UP		OFF
SYNC			INT		SYNC		INT
WHITE BAL			ATW1↵		WHITE BAL		ATW1↵
MOTION DET			OFF		MOTION DET		OFF
LENS	DRIVE		DC		LENS DRIVE		DC
END					END
		SET UP DISABLE				SET UP ENABLE

Important Notice:

When the cursor is moved to END and the CAM SET UP menu closed after changing the parame- ters, the new values are saved in the EEPROM (Electric Erasable and Programmable Read Only Memory). These values remain valid until new val- ues are saved, even if the power of the camera is off.

-20-