Chapter 4

Advanced Configuration

Some Internet applications or games use alternate ports to communicate between the server and LAN host. When you want to use these applications, enter the triggering (outgoing) port and alternate incoming port in the Port Triggering table. Then the Router will forward the incoming packets to the LAN host.

Application Name  Enter the name of the application.

Trigger Port Range  Enter the starting and ending port numbers of the trigger port range.

Incoming Port Range  Enter the starting and ending port numbers of the incoming port range.

Click Add to List, and configure as many entries as you would like, up to a maximum of 30. To delete an entry, select it and click Delete selected application.

Click Show Tables to see the details of your entries. The Port Range Forwarding Table List appears.

Port Range Forwarding Table List

Port Range Forwarding  Select this option to view the Port Range Forwarding entries.

Port Triggering  Select this option to view the Port Triggering entries.

Port Triggering Table List

Click Refresh to update the on-screen information. Click Close to exit this screen and return to the Forwarding screen.

On the Forwarding screen, click Save Settings to save your changes, or click Cancel Changes to undo them.

Setup > UPnP

Universal Plug and Play (UPnP) can be used to set up public services on your network. When the UPnP function is enabled, Windows XP or Vista can modify these entries via UPnP.

Setup > UPnP

UPnP

UPnP Function  Select Yes to enable the UPnP function. Otherwise, keep the default, No.

Service  Select the Service you want.

Name or IP Address  Enter the name or IP address of the server that you want the Internet users to access.

Enable  Select Enable to enable this UPnP entry.

If the Service you need is not listed in the menu, click Service Management to add the new service. The Service Management screen appears.

Service Management

Service Name  Enter a name.

Protocol  Select the protocol it uses.

External Port  Enter the external port number. Internal Port  Enter the internal port number.

Click Add to List. Click Save Settings to save your changes, or click Cancel Changes to undo them. Click Exit to return to the UPnP screen.

10/100 4-Port VPN Router

15

Page 22
Image 22
Cisco Systems RV042RF manual Setup UPnP