Chapter 4 | Advanced Configuration |
Setup > Password
Password
The User Name is admin; it cannot be changed.
Old Password Enter the old password. The default is admin when you first power up the Router.
New Password Enter a new password for the Router. Your password must have 20 or fewer characters and cannot contain any spaces.
Confirm New Password
Click Save Settings to save your change, or click Cancel Changes to undo it.
Setup > Time
The Router uses the time settings to time stamp log events, automatically apply the Access Rules and Content Filter, and perform other activities for other internal purposes.
Time
To set the local time, select Set the local time using the Network Time Protocol (NTP) automatically or Set the local time Manually.
Automatic
Setup > Time > Automatic
Time Zone Select your time zone. The default is (GMT- 08:00) Pacific Time (US & Canada); Tijuana.
Daylight Saving To use the daylight saving feature, select Enabled. Enter the Month and Day of the start date, and then enter the Month and Day of the end date.
NTP Server Enter the URL or IP address of the NTP server. The default is time.nist.gov.
Manual
Setup > Time > Manual
Hours, Minutes, Seconds Enter the time.
Month, Day, Year Enter the date.
Click Save Settings to save your changes, or click Cancel Changes to undo them.
Setup > DMZ Host
The DMZ (Demilitarized Zone) Host feature allows one local user to be exposed to the Internet for use of a
Setup > DMZ Host
DMZ Host
DMZ Private IP Address Enter the local IP address of the computer you want to expose. The default value of 0 deactivates the DMZ Host.
Click Save Settings to save your change, or click Cancel Changes to undo it.
10/100 | 13 |
