Setting Up Screen Call
This feature enables you to screen incoming calls by using a recorded announcement, either one that is prerecorded or one that you record.You can also record the caller’s message into the Voice Memo list.
Activating Screen Call
To start Screen Call when you have incoming calls:
▶When the phone rings or vibrates, press Options (right softkey) >ScreenCall.
To set Auto Screen Call:
1.Select 
>Tools>VoiceServices>ScreenCall>Auto.
2.Select On and press 
.
3.Set the answering time by using numeric keys or by pressing the navigation key up or down.
4.Press 
or OK (left softkey). (The 
icon is displayed on the standby display.)
Tip: If a new caller’s message is waiting, 
appears on the display. The memos recorded while activating “Screen Call” are shown with a “ 
”or “ 
”icon in the list (“ 
”: played once; “ 
”: not yet played). To listen to the message, see “ReviewingVoice Memos”on page 133.
Tip: While the caller’s message is being recorded, press 
to
answer the call, or press 
to stop recording and disconnect the call.
Voice Services
Section 2H: Using Your Phone’s Voice Services | 135 |
