21
e To perform fine adjustment of the back focus after automatic back focus adjustment,
use the right or left button. (No operation for 10 seconds or more closes the setup
menu.)
Note:
• When an auto iris lens is used to recorda subject, the originally adjusted focus may be
slightly off depending on the iris state resulting from the focal depth of the lens. In such a
case, open the aperture by darkening the subject as much as possible in the same way of
taking picture, and then adjust the focus. Defocus can be prevented.
• Foradjustmentaccordingto"Howtoadjustthebackfocus",thefocuscanautomaticallybe
adjusted under the optimal follow-up conditions even though the illuminance changes
(Note: The adjusted focal point is not necessarily the same as the optimal focal point at a
certain illuminance.).
• The out-of-focus level in the near-infrared light region may be higher than that in the visible
light region.
Setting "C/L ← → B/W" of "BACK-FOCUS SETUP" to "AUTO" or "PRESET" in the setup menu
(+ the setup instructions (PDF) allows users to adjust the focus in both the near-infrared
light and visible light regions (The variation in illuminance is not followed after focus adjust-
ment.).
• Whenanon-Panasonic lensthat hasan extendedrangefor lensfocusing isused, adjust
the back focus after setting the focus to a position at a short distance from the FAR end. If
adjustment is performed in the extended range, appropriate adjustment