12
When the SUPER-D5 function is set to "OFF": OFF (1/60) (default), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, and
1/10 000
When the SUPER-D5 function is set to "ON" or "ON(i-VMD)": OFF (1/60) (default), 1/100
Note:
•When"ALC/ELC"issetto"ELC"or"ALC+"(+page9),"---"appearsandtheelectronicshutterfunctioncannotbeactivated.
•Ifthecontroller,WV-CU254orWV-CU204isused,SWLEDandthestatusof"SHUTTER"arenotcorrectlydisplayed.
4. Gain control setting [AGC]
Selectagaincontrolsettingfromthefollowing.
ON (HIGH) (default)/ON (MID)/ON (LOW):Automaticallyincreasesthegaintomakethescreenbrighterwhentheilluminanceof
thesubjectbecomesdarker.
HIGH,MIDandLOWindicatethegainlevel.
OFF:Doesnotincreasethegain.
Note:
•When"SENSUP"issettotheAUTOmode,“AGC”cannotbesetto“OFF”.
5. Electronic sensitivity enhancement setting [SENS UP]
Useof theelectronicsensitivity enhancementfunction increasesthe quantityof lightstored onthe CCD,and accordinglythe
imagebecomes brighter.Themagnification isunchanged for selectionof FIX,and themagnification is changeablein accor-
dancewiththeilluminanceofaphotographicsubjectforselectionofAUTO.
Themagnificationoftheelectronicsensitivityis selectablefromthefollowing.Thesettingof theSUPER-D5functionrestrictsthe
availablesettingrange.
When the SUPER-D5 function is set to "OFF":OFF(default)/X2AUTO/X4AUTO/X6AUTO/X10AUTO/X16AUTO/X32AUTO/
OFF/X2FIX/X4FIX/X6FIX/X10FIX/X16FIX/X32FIX
When the SUPER-D5 function is set to "ON" or "ON (i-VMD)":OFF(default)/X2AUTO/X4AUTO/X6AUTO/X10AUTO/X16
AUTO/X32AUTO
Note:
•When "ALC/ELC"issetto "ELC"or"ALC+"(+ page9),or"SHUTTER" issetto"1/100" (+page11),only theAUTOmodeis
enabled.
•When "SHUTTER"is setto"OFF" orotherthan "1/100",theelectronicsensitivity enhancementsettingcannot beperformed.
"---"appearsand"OFF"isselected.
•It is impossible to select "AUTO" for "SENS UP" and "1/100" for "SHUTTER" using the following system controller. Use the
operationbuttonsforthesetting.
WV-CU300,WV-CU354,WV-CU204,WV-CU254
•When themagnificationof"SENSUP"isincreased,thescreenbecomescoarser,morewhitish,ormoreflawed.However,this
phenomenonisnormal.
•Ifthecontroller,WV-CU254orWV-CU204isused,SWLEDandthestatusof"SENSUP"arenotcorrectlydisplayed.
6. White balance setting [WHITE BAL]
Thewhitebalanceadjustmentisselectablefromthefollowing.
ATW1 (default):Activates theautomatic colortemperature trackingmode. Thecamera continuouslymeasuresthe colortem-
peratureof thelight sourceand automaticallyadjusts thewhite balance.The adjustment ofthe colortemperature ranges
fromapprox.2700Kto6000K.