28
Step 3
Move the cursor to "C/L ← → B/W" and select the back focus adjustment type from the following:
AUTO (default): Adjusts the back focus function automatically and corrects out of focus when switching between color and
black-and-white images.
PRESET: Performs the preset movement to each specified back focus position when switching between color and black-and-
white images. The preset position is the back focus position specified last time, which was automatically memorized for
each of color images and black-and-white images.
FIX: Fixes the position after adjusting the back focus either automatically (ABF) or manually.
Step 4
Moving the cursor to "SETUP-SW LOCK" and selecting "ON" allow users to disable the back focus adjustment with the operation
buttons (default: OFF).
Important:
•Thefollowingarerecommendationforbackfocussettinginaccordancewithsubjects.
•We shallnotresponsible foranyinconvenience, loss,or damagecausedby thesettingsor resultsofthe backfocusfunc-
tion.
For such case (subject conditions)
•Nor malsubject
•Frequentlymovingsubj.
•Subj.withremarkableilluminance
change
•Subj.withlowilluminance
•Toobrightorreflectivesubj.
•Subj.throughawindow
•Placewherethelenseasily
becomes dirty
•Subj.withlesscontrastsuchas
white wall
•Subj.withremarkabledepth
•Subj.withheavyflicker
•Subj.withhorizontallyparallellines
such as a shutter
Select this (recommendation)
Back focus adjustment
"ABF"
Fine adjustment with "MANUAL-ADJ"
after "ABF" or "MANUAL-ADJ"
"C/L ← → B/W" switching
"AUTO"
"PRESET" or "FIX"