Panasonic WV-CW480S Installations (WV-CW480S)

14
■Installations (WV-CW480S)
●Using Provided Mounting Bracket
• Secure the provided camera mounting bracket to wall or ceiling, and fix the provided cam-
era attachment to the mounting bracket with the screws for to the mounting bracket. (Refer
to the following figures.)
Verify the camera attachment and mounting bracket are mounted firmly after screwing
them.
• When routing cables sideway or through
the wall/ceiling, the mounting bracket is
used.
• When routing cables sideway, open the
sideway cable exit unscrewing the lid by
use of a hexagon wrench. Screw the
detached lid to the cable access hole on
the bottom of the bracket.
• Make sure that the sideway cable exits
do not face upward.
77 mm
Bracket centre
Drain slit*
* For wall mounting, do not face the
sideway cable exits upward.
51 mm
Sideway cable exit
92 mm
<Mounting hole pattern>
Cable access hole
Camera attachment (provided)
TOP
TOP
TOP
Mounting
bracket
<Fixing the camera attachment to the
mounting bracket>