!
Full screen button
Images will be displayed on a full screen. To return to the "Live" page, press the [Esc] key. When dis- playing images on a full screen, the audio transmis- sion button will become unavailable.
!
One shot button
Click this button to take a picture (a still picture). The picture will be displayed on a newly opened window. When
When "Print" is selected, printer output is enabled.
!
Mic input button (*3)
Turns on/off the audio reception (hear audio from the camera on a PC). This button will be displayed only when "Mic input", "Interactive (full duplex)" or "Interactive (half duplex)" is selected for "Audio mode" on the setup menu.
(☞ Setup Instructions)
When this button is clicked, the button will turn into
the 
button and audio from the camera will not be heard.
Audio volume can be adjusted (Low/Middle/High) by
moving the volume cursor 
.
@
Audio output button (*3)
Turns on/off the audio transmission (play audio from the PC on the camera speaker). This button will be displayed only when "Audio output", "Interactive (full duplex)" or "Interactive (half duplex)" is selected for "Audio mode" on the setup menu. (☞ Setup Instructions)
The button blinks while the audio transmission is being carried out except the case of setting to "Interactive (full duplex)".
When this button is clicked, the button will turn into
the 
button and audio from the PC will not be heard.
Audio volume can be adjusted (Low/Middle/High) by
moving the volume cursor 
.
Notes:
•When a user is using the audio transmission func- tion with "Interactive (full duplex)" selected, the receiver button and the transmission button will be inoperable for the other users. When "Interactive (full duplex)" is selected, the transmission button is inop- erable for other users.
•Possible duration of audio transmission is up to 5 minutes per transmission. When 5 minutes have passed, the audio transmission function will be can- celed and the audio reception function will automati- cally be turned on. To turn the audio transmission function on, click the transmission button again.
•When the camera is restarted, the adjusted volume level (for both the audio transmission and reception) will return to the level that had been set on the [Audio] tab on the setup menu.
(☞ Setup Instructions)
•Actual volume level will change in three steps even though the volume cursor can be adjusted minutely.
@
SD recording status indicator
The status of the SD recording can be checked with this indicator.
When the SD recording starts, this indicator will light red. When the SD recording stops, this indicator will go off.
This indicator will be displayed only when "Manual" is selected for "Save trigger" on the setup menu. (☞ Setup Instructions)
@2Main area (*2)
Images from the camera will be displayed in this area.
The current time and date will be displayed at the selected position in the time and date format set on the setup menu. (☞ Setup Instructions).
Click a desired point in the main area on the "Live" page that is to be the center of the angle of view. The camera moves to adjust the position in order to set the clicked point as the center.
When selecting an area in the main area by drag- ging the mouse, the selected area will be located at the center of the main area.
In this case, the zoom ratio will be adjusted automat- ically.
Zoom can be adjusted using the mouse wheel.
Notes:
•When the displayed image is being zoomed in more than 30x, the clicked point may not always be locat- ed at the center of the main area.
•When the mouse is dragged to move the camera beyond its operable range, the camera will move to the requested direction and will stop at the end of the operable range. Then, the zoom ratio of the dis- played image will automatically be adjusted.
8
