Useful Information
52 For assistance, please visit http://www.panasonic.com/phonehelp
Making/answering calls, intercom
Problem Cause/solution
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
LMove the handset and the base unit away from other
electrical appliances.
LMove closer to the base unit.
LRaise the base unit antennas.
LTurn on the clarity booster feature (page 24).
LIf your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
The handset does not
ring.
LThe ringer volume is turned off. Adjust it (page 36).
The base unit does not
ring.
LThe ringer volume is turned off. Adjust it (page 23).
I cannot make a call. LThe dialing mode may be set incorrectly. Change the
setting (page 20).
LThe base unit or another handset is in use. Try again
later.
I cannot redial by
pressing {REDIAL}.
LIf the last number dialed was more than 48 digits long,
the number will not be redialed correctly. Dial the
number manually.
I cannot have a
conversation using the
headset.
LMake sure that an optional headset is connected
properly (page 49).
LIf “SP-phone” is displayed on the handset, press {C}
to switch to the headset.
I cannot make long
distance calls.
LMake sure that you have long distance service.
I cannot page the
handset.
LThe called handset is too far from the base unit.
LThe called handset is in use. Try again later.
I cannot page the base
unit.
LThe base unit is in use. Try again later.
TG563X_565X.book Page 52 Tuesday, April 11, 2006 10:22 AM