Panduit CJS5E88T Telecommunication Room Shielding Continuity, S-Ftp, Stp / Pimf, S-Stp / Pimf

INSTALLATION INSTRUCTIONS PN347

TELECOMMUNICATION ROOM SHIELDING CONTINUITY

FTP / ScTP
Drain wire	2	All Metal Patch
		Panel Shielding
	1
		(OR)
		CJSGK-X Kit
		3

S-FTP, STP / PIMF,
S-STP / PIMF	2	All Metal Patch
		Panel Shielding
	1	(OR)
		CJSGK-X Kit
		3

TERMINATION CAP REMOVAL

1

2

3

GIGA-TXWiring Sequences

Notes:

1. For specified performance, follow TIA/EIA 568-B installation guidelines.

T568-A

Brown 8

White/Brown 7

Orange 6

White/Blue 5

Blue 4

White/Orange 3

Green 2

White/Green 1

BOTTOM TOP
7	8

46

5 3

2 1

Pin #’s

1 8

T568-B

Brown 8

White/Brown 7

Green 6

White/Blue 5

Blue 4

White/Green 3

Orange 2

White/Orange 1

		2.	Jack Modules can terminate PVC or Plenum rated 22-24 AWG solid or
			stranded IWC cable with 0.048 inch (1.2 mm) maximum insulated
			conductor outside diameter.
BOTTOM TOP		3.	Jack Modules may be re-terminated a minimum of 10 times.
		4.	For technical and performance information, consult PANDUIT Technical
			Support.
		As with all Wiring Accessories, the following statements apply:
7	8	1.	Never install communications wiring during a lightning storm.
		2.	Never install communications wiring in wet locations unless the jack is
4	6		specifically designed for use in wet locations.
5	3	3.	Never touch uninsulated communications wiring or terminals unless the
2	1		communication line has been disconnected at the network interface.
		4.	Use caution when installing or modifying communication wiring.

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp

		E-mail:
		cs@panduit.com
www.panduit.com		Fax:
	(708) 444-6993

Page 3 of 3