Australian Furniture Adapter
PART NUMBER:
PN260 INSTALLATION INSTRUCTIONS
© Panduit Corp. 2001 | Printed in U.S.A. |
CMAA1
Module Installation
1.Orient module and Adapter as shown above.
2.Align groove on module with notch on Adapter. Swing module downward.
3. Snap into place.
Module Removal
1. Press down on tab while pushing upward on the module.
2. Remove module from Adapter.
The Adapter can fit into a 25mm or 1.00" square knock out in any metal or plastic panel that is 1.5mm - 2mm (.06"
The knock out could be located in a furniture panel, raceway, or desk as long as it meets the previous criteria.
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
| NETWORK CONNECTIVITY GROUP |
|
10500 West 167th Street | Technical Support: | Web site: www.panduit.com/ncg |
Orland Park, Illinois 60467 | Fax: |
|
Page 1 of 1