NCR S26 manual Installing Drives, Removing the Upper Front Panel Cover and Frame

Installing Drives

Installing Drives

CAUTION: Read the “ESD Precautions” section earlier in this chapter before proceeding.

This section describes in detail how to install disk drives in the system.

Removing the Upper Front Panel Cover and Frame

When installing drives on the 5.25-inch drive bays, you have to remove the upper front panel cover and frame. Follow these steps:

1.Open the lower front panel cover.

2.Press the latch under the upper front panel and pull as shown in the figure below.

Figure 3-8. Removing the Upper Front Panel Cover and Frame

3-18 Adding and Replacing Components