NCR S26 manual Power Saving Configuration, Power Management Mode

Power Saving Configuration

Power Saving Configuration

The Power Saving Configuration parameters permit you to configure the system power management feature.

The figure below shows the Power Saving Configuration parameters and their default settings.

Figure 4-8. Power Saving Configuration

Power Saving Configuration		Page 1/1
Power Management Mode	[ Disabled ]
IDE Hard Disk Standby Timer . . . .	[ OFF ]
System Suspend Timer	[ OFF ]

System Wake Up Events						. . [ Disabled ]
		IRQ 0 . . . .	[ Disabled ] *		IRQ 8 . .
		IRQ 1 . . . .	[ Enabled ] *		IRQ 9 . .	. . [ Disabled ]
		IRQ 3 . . . .	[ Disabled ]		IRQ 10 .	. . [ Disabled ]
		IRQ 4 . . . .	[ Disabled ]		IRQ 11 .	. . [ Disabled ]
		IRQ 5 . . . .	[ Disabled ]		IRQ 12 .	. . [ Enabled ] *
		IRQ 6 . . . .	[ Enabled ] *		IRQ 13 .	. . [ Disabled ]
		IRQ 7 . . . .	[ Disabled ]		IRQ 14 .	. . [ Enabled ] *
					IRQ 15 .	. . [ Disabled ]
		= Move Highlight Bar,			= Change setting,
	PgDn/PgUp = Move Screen,			F1 = Help,		Esc = Exit

Note: The grayed items (here denoted with asterisks) have fixed settings and are not user-configurable.

Power Management Mode

This parameter permits you to reduce power consumption. When it is set to Enabled, you can configure the monitor power-saving timer, IDE hard disk standby timer, and the system suspend timer. The following sections describe the timers.

NCR S26 Hot Plug Server User Guide 4-21